Containerized Load Bank - Yangzhou Darui

Containerized Load Bank

Darui Electric recommends for you

Product Introduction

Marine containerized load bank (ultra-high power intelligent load bank) Marine generators mostly use diesel fuel. When diesel runs below 50% load or under no load for a long time, it can cause incomplete combustion, carbon buildup, reduced overall efficiency, and eventually lead to starting difficulties, insufficient power, increased fuel consumption, and premature overhaul or scrapping. The load bank is an ideal dummy load for generators. The ALB-DT marine containerized load bank (ultra-high power intelligent load bank) is an ideal testing device for measuring generator parameters such as power, frequency, voltage, current, power factor, and stability. 

The ALB-D intelligent three-phase AC load bank (diesel generator set test load bank) we provide can test the output power and load capacity of various generator sets. 

Function Introduction

1. Stainless steel fixed container design. 

2. During acceptance of newly installed diesel generators, test whether they meet design requirements. 

3. After adding noise reduction equipment such as mufflers to diesel generators, test whether their output power meets the operational needs of communication equipment. 

4. After repairing diesel generators, test whether performance indicators such as output power and load capacity meet requirements. 

5. Routine maintenance and periodic testing of diesel generators: according to the newly issued communication power maintenance regulations, diesel generators should be loaded and tested for 15-30 minutes every six months. 

Application Fields

Ships, railways, electric power, communication base station power supply load testing. 

Main Technical Specifications 

Discharge Power  10KW  20KW  20KW  20KW  20KW 

Discharge Voltage Range  AC 400V/20V Three-phase Four-wire  AC 400V/230V Three-phase Four-wire  AC 300V Three-phase Four-wire  AC 600V Three-phase Four-wire  AC 10.5KV Three-phase Four-wire 

Frequency Measurement Range  50HZ/60HZ  50HZ/60HZ  50HZ  50HZ  50HZ 

Power Measurement Range  0-10kw  0-20kw  0-100kw  0-500kw  0-10kw 

Adjustment Accuracy  1KW  0-20kw  1KW  1KW  1KW 

Control Type  AC Contactor  AC Contactor  High Voltage Vacuum Contactor  High Voltage Vacuum Contactor  High Voltage Vacuum Contactor 

Power Supply  Three-phase + N AC 380V  Three-phase + N AC 380V  Three-phase + N AC 380V  Three-phase + N AC 380V  Three-phase + N AC 380V 

Protection Devices  Overvoltage, High Temperature Alarm, Fan Fault Protection  Overvoltage, High Temperature Alarm, Fan Fault Protection  Overvoltage, High Temperature Alarm, Fan Fault Protection  Overvoltage, High Temperature Alarm, Fan Fault Protection  Overvoltage, High Temperature Alarm, Fan Fault Protection 

Cooling Method  Forced Air Cooling  Forced Air Cooling  Forced Air Cooling  Forced Air Cooling  Forced Air Cooling 

Optional Functions  Manual Type / Computer Remote Control     

Voltage  ± (0.25% of reading + 0.25% of range)  ± (0.25% of reading + 0.25% of range)  Optional Instrument  Optional Instrument  Optional Instrument 

Current  ± (0.25% of reading + 0.25% of range)  ± (0.25% of reading + 0.25% of range)       

Power  Power Factor = 1.0: ± (0.25% of reading + 0.25% of range)  Power Factor = 1.0: ± (0.25% of reading + 0.25% of range)               

Running Time  ±2 seconds per hour  ±2 seconds per hour       

Electric Energy  Power Factor = 1.0: ± (0.25% of reading + 0.25% of range) Power Factor = 0.5: ± (0.5% of reading + 0.5% of range)  Power Factor = 1.0: ± (0.25% of reading + 0.25% of range) Power Factor = 0.5: ± (0.5% of reading + 0.5% of range)       

Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.