HSXDP-H Ultra-Low Frequency Withstand Voltage Test Device
Darui Electric recommends for you
Product Parameters:
◆ Working Power: AC 220V±10% 50Hz±10%
◆ Ambient Temperature: 0-40℃
◆ Relative Humidity: ≤90%
◆ Output Voltage: 0-30KV, 0-50KV, 0-80KV
◆ Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz
◆ Load Capacity: Max 1.1μF at 0.1Hz output
Max 2.2μF at 0.05Hz output
Max 5.5μF at 0.02Hz output
◆ Voltmeter Indication Accuracy: ≤3%
◆ Ammeter Indication Accuracy: ≤5%
Product Introduction:
It is a new type of ultra-low frequency AC test device mainly using cosine square wave as output source, mainly used for non-destructive insulation withstand voltage test of PE (polyethylene)/XLPE (cross-linked polyethylene) and other plastic power cables in the power sector. It has international advanced level at the end of the 20th century and domestic superior level.
Product Aliases:
Ultra-low frequency high voltage generator, 0.1Hz ultra-low frequency high voltage generator, program-controlled ultra-low frequency high voltage generator, ultra-low frequency AC high voltage test device, ultra-low frequency withstand voltage test device.
Product Features:
It has power overcurrent, high voltage overcurrent, oil tank overheat protection functions, and the output voltage regulator cannot start high voltage if not returned to zero. It is a replacement product for traditional power frequency withstand voltage test equipment.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
